: +90 212 253 1307
  • Johannes Hübner Giessen FGH 40 hollow shaft up to Ø 20 mm

Johannes Hübner Giessen FGH 40 hollow shaft up to Ø 20 mm

  • 0,00€

- OR -

Incremental encoder with a hollow shaft

The incremental encoder FGH 40 is the successor to the FGH 4 series of encoders and represents the new generation of encoders from Johannes Huebner Giessen. The hollow shaft version of the FGH 40 is utilized to measure speed in heavy industry applications such as in steel and rolling mills, in the mining industry as well as in ports and crane systems. Rated to protection class IP65 / IP66 the device is extremely robust, the hollow shaft is made of corrosion-resistant stainless steel, the casing is made of aluminium. The hollow shaft is available in diameters between 16 and 20 millimeters.

Operating and Assembly Instructions FGH 40
Operating and Assembly Instructions (UL) (NEW) FGH 40
Catalog - FGH 40
Catalog - Torque brackets FGH 40
Inquiry form - Incremental encoders FGH 40
Product article series FG(H) 40
UL/CSA Certificate of Compliance FGH 40
HEAVY DUTY ENCODER ÖZELLİKLERİ
Diameter hollow shaft 16 mm or 20 mm
Supply voltage 12 - 30 VDC
Special pulse rates HTL/TTL 4000, 4096, 4800, 5000, 8192, 10000, 12000, 16000, 16384, 20000, 25000 up to 1 million
Standard pulse rates HTL/TTL 1000, 1024, 1200, 2000, 2048, 2400, 2500
Standard pulse rates Sin/Cos 500, 600, 100, 1024, 1200, 1300, 2500
Output signals 0°, 90° channels and inverted signals
Maximum frequency 200 kHz
Device temperature range 0 °C to +70 °C Optional: -25 °C to +85 °C | -40 °C to +85 °C | -5 °C to +100 °C
Degree of protection up to IP66
Weight approx. 3.5 kg
İSTEĞE BAĞLI ÖZELLİKLER
Option N Mechanically fixed reference pulse (N), one square pulse per revolution, with inverted signal
Option 2F Twice as many pulses as basic channel by combining the 0° and 90° channels
Option B Rapid direction of rotation sensing at each edge of 0° and 90° channels
Option B2 Rapid direction of rotation sensing at each edge of 0° and 90° channels; additional standstill detection
Option B3 Direction of rotation dependent output signals. This option supports counter cards with separate UP/DOWN pulse inputs. Basic channel signals are issued at optional output 1 when rotation is clockwise and at optional output 2 when rotation is counterclockwise.
Option S Electronic overspeed switch with two mutually independent, programmable switching points
Option FOC As an alternative to conventional signal transmissions via copper cables it is also possible to transmit encoder signals via fiber optic cables
Option SH 1 Vpp signals sine, cosine, reference pulse; error as HTL signal; all respective signals with inverted signals
Option ST 1 Vpp signals sine, cosine, reference pulse; error as TTL signal; all respective signals with inverted signals

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi
Doğrulama Kodu

Etiketler: johannes hübner giessen